Share This:

Clark Synthesis Presents – Wiring One or More TST429 Platinum Transducers

Wiring One TST429 –> 0:15
Wiring Two TST429s –> 0:43
Wiring Four TST429s –> 1:40

Wiring One TST429
Clark Synthesis recommends an amplifier rated 125-150 watts per channel at 4 ohms (Pay attention to the 4 ohms!)
Attach the red wire to the amplifier’s positive (+) output
Attach the black wire to the amplifier’s negative (–) output

Wiring Two TST429s
Clark Synthesis recommends an amplifier rated 125-150 Watts per channel at 8 ohms (Pay attention to the ohms!)
Connect TST #1’s black wire to TST #2’s red wire with a wire nut (you can also solder & use heat shrink tubing)
Attach TST #1’s red wire to the amplifier’s positive (+) output
Attach TST #2’s black wire to the amplifier’s negative (–) output

Wiring Four TST429s
Clark Synthesis recommends an amplifier rated 500-600 Watts per channel at 4 ohms (pay attention to the 4 ohms!)
Connect TST #1’s black wire to TST #2’s red wire
Connect TST #3’s black wire to TST #4’s red wire
Connect a cable from the Transduces to the amplifier
Connect a red wire to TST #1 & TST #3’s red wires
Connect a black wire to TST #2 & TST #4’s black wires
Attach the red wire to the amplifier’s positive (+) output
Attach the black wire to the amplifier’s negative (–) output
Longer runs may require larger gauge wires
Older products may have different color wires.
Please contact Clark Synthesis for more information.

View the TST429 Wiring Diagram: https://clarksynthesis.com/wp-content/uploads/2020/02/WiringTransducerDiagram_TST429.png

For more information contact Clark Synthesis
303-797-7500
info@clarksynthesis.com
www.clarksynthesis.com