• Isolation Feet
  • Isolation Feet, Rubber
  • Isolation Feet, Metal
Isolation Feet

The Isolation Feet provides the ultimate in isolation
capability. Utilizing metal, neoprene and natural rubber
components, these feet enhances the effectiveness of Clark
Synthesis Transducers by reducing vibration transmission into
the floor.

  • The entry-level TI-100 Isolation Foot is constructed of natural rubber
    and can be used as a low-profile foot replacement. Use of the TI-100
    helps reduce vibration transmission into the floor and improves the
    performance of Clark Synthesis Transducers.
  • The TI-100 Isolation Foot has a diameter of 2.5 in.
    (63.5 mm) and a height of 1 in. (25.4 mm).
  • The mid-level TI-200 Isolation Foot helps improve the performance
    of Clark Synthesis Transducers. With a low-profile design and two
    separate installation options, the TI-200 is a great alternative for
    replacing existing feet or gaining additional clearance on furniture,
    platforms, and risers.
  • The TI-200 Isolation Foot has a base of 3.88 in. x 2.38 in.
    (98.4 mm x 60.3 mm) and a height of 1.75 in. (44.5 mm).
  • The TI-300 Isolation Foot provides the ultimate in isolation
    capability. With several different configuration possibilities, the TI-300 foot
    can be used to replace existing feet on furniture, as well as provide
    additional clearance for the installation of transducers. The angle
    bracket is ideal for screwing into furniture frames or the support
    structures of platforms and risers.
  • The TI-300 Isolation Foot has a base of 4.0 in. x 4.0 in.
    (101.6 mm x 101.6 mm) and a height of 2.25 in. (57 mm).
Isolation Foot TI-100
High Resolution

Low Resolution

Isolation Foot TI-200
High Resolution

Low Resolution

Isolation Foot TI-300
High Resolution

Low Resolution

  • Laughing and Screaming with Great Delight

Laughing and Screaming with Great Delight

It was a phone call.  A phone call I didn’t expect.  A phone call that, well, you will see… Some years ago, I had a neighbor named Kurt. Kurt was an interesting guy. He was an airline pilot, restored tube radios, and had built a simple home theater. In his basement was an alcove outside his son’s bedroom. Kurt mounted a [...]

  • Wiring One or More TST239 Silver Transducers

Wiring One or More TST239 Silver Transducers

Clark Synthesis Presents – Wiring One or More TST239 Silver Transducers Wiring One TST239 --> 0:15 Wiring Two TST239s --> 0:40 Wiring Four TST239s --> 1:34 Wiring One TST239 Clark Synthesis recommends an amplifier rated 100-125 Watts per channel at 4 ohms (Pay attention to the 4 ohms!) Attach the striped wire to the amplifier’s positive (+) output Attach the clear [...]

  • Wiring One or More AW339 All-Weather Transducers

Wiring One or More AW339 All-Weather Transducers

Clark Synthesis Presents – Wiring One or More AW339 All-Weather Transducers Wiring One AW339 --> 0:15 Wiring Two AW339s --> 0:40 Wiring Four AW339s --> 1:28 Wiring One AW339 Clark Synthesis recommends an amplifier rated 125-150 watts per channel at 4 ohms (Pay attention to the 4 ohms!) Attach the red wire to the amplifier’s positive (+) output Attach the black [...]

  • Wiring One or More TST429 Platinum Transducers

Wiring One or More TST429 Platinum Transducers

Clark Synthesis Presents – Wiring One or More TST429 Platinum Transducers Wiring One TST429 --> 0:15 Wiring Two TST429s --> 0:43 Wiring Four TST429s --> 1:40 Wiring One TST429 Clark Synthesis recommends an amplifier rated 125-150 watts per channel at 4 ohms (Pay attention to the 4 ohms!) Attach the red wire to the amplifier’s positive (+) output Attach the black [...]

  • Wiring One or More TST329 Gold Transducers

Wiring One or More TST329 Gold Transducers

Clark Synthesis Presents – Wiring One or More TST329 Gold Transducers Wiring One TST329 --> 0:15 Wiring Two TST329s --> 0:44 Wiring Four TST329s --> 1:35 Wiring One TST329 Clark Synthesis recommends an amplifier rated 125-150 watts per channel at 4 ohms (Pay attention to the 4 ohms!) Attach the red wire to the amplifier’s positive (+) output Attach the black [...]

Mounting a Transducer to a Gaming Chair

Mounting a Transducer in a Gaming Chair For this demonstration we are using a Playseat and a 1x6” (19x140 mm) plank with a T-Nut (You can also use the uni-mount bracket or other TST mounting forms) Flip the seat over Mark two holes 3” (7.6 cm) apart on both sides under the seat Drill the marked holes Cut a 1x6” (19x140mm) [...]

Load More Posts

It depends on where the TSTs are located. Are the TSTs mounted directly to your chairs? Then we recommend you put isolation feet on those chairs. Are your TSTs mounted to a platform? Then we recommend you put isolation feet on the platform instead of the chairs.

You want to replace the existing feet of the chair or sofa with isolation feet.

Using a platform or riser? We recommend an isolation foot every 16 inches.

Isolation feet keep the tactile sound vibrations from leaking into the floor. This means that more of the TST’s output stay in the chair/platform. This improves the tactile experience.

Yes!  Clark Synthesis TSTs are used in therapy chairs, therapy beds, massage tables, etc. If you do a Google search for Vibroacoustic, you will find many products that contain Clark Synthesis TSTs.

Clark Synthesis Tactile Sound Transducers (TSTs) transform pure audio as electrical energy into pure audio as vibrational energy.  TSTs are much more than shakers.  Shakers only make things shake.  TSTs faithfully reproduce audio signals bringing new levels of realism and enjoyment to VR spaces, Home Theaters, Simulators, Movie Theaters, etc.

Contact us about your application. We are delighted to make recommendations.

Tactile Sound is pure audio that is felt through touch and is heard through bone conduction.

Go to Top