AQ339 Diluvioᵀᴹ Underwater Loudspeaker
The Diluvio™ Underwater Loudspeaker is the world’s only full-frequency, full-fidelity underwater speaker. This state of the art speaker adds high-quality sound to your pool, enabling a wide array of swimming enthusiasts to enjoy the gift of music below the water’s surface.
Buying Options
AQ339-15
AQ339-50
AQ339-100
AQ339-150
AQ339-200
Diluvio™ Underwater Loudspeaker with 15 ft (4.5 m) of Cable
Diluvio™ Underwater Loudspeaker with 50 ft (15.2 m) of Cable
Diluvio™ Underwater Loudspeaker with 100 ft (30.5 m) of Cable
Diluvio™ Underwater Loudspeaker with 150 ft (45.7 m) of Cable
Diluvio™ Underwater Loudspeaker with 200 ft (60.9 m) of Cable
AQ339 Diluvioᵀᴹ Underwater Loudspeaker
The Diluvio™ Underwater Loudspeaker is the world’s only full-frequency, full-fidelity underwater speaker. This state of the art speaker adds high-quality sound to your pool, enabling a wide array of swimming enthusiasts to enjoy the gift of music below the water’s surface.
Buying Options
AQ339-15
Diluvio™ Underwater Loudspeaker with 15 ft (4.5 m) of Cable
AQ339-50
Diluvio™ Underwater Loudspeaker with 50 ft (15.2 m) of Cable
AQ339-100
Diluvio™ Underwater Loudspeaker with 100 ft (30.5 m) of Cable
AQ339-150
Diluvio™ Underwater Loudspeaker with 150 ft (45.7 m) of Cable
AQ339-200
Diluvio™ Underwater Loudspeaker with 200 ft (60.9 m) of Cable
The Diluvio™ Underwater Loudspeaker is the world’s only full-frequency, full-fidelity underwater loudspeaker. Backyard pool enthusiasts, lap swimmers and competitive swimmers agree the Diluvio™ turns any pool experience into something truly spectacular. The Diluvio™ brings water to life, allowing music and sound to be heard through the body below the water’s surface.
The Diluvio™ can be used in two different ways. For a permanent installation, the Diluvio™ can be mounted inside a large light niche with a face ring kit (sold separately). For users who require underwater sound in multiple locations, such as synchronized swim teams, a tether can be attached to the Diluvio™ so it can be used as a drop-in speaker.
The Diluvio™ Underwater Loudspeaker requires an amplifier for operation. Clark Synthesis recommends an amplifier stable at 4 ohms that can deliver 125-150 watts @ 4 ohms (per speaker).
Specs:
- Continuous Power Handling: 135 watts
- Impedance: 4 ohms
- Overload Protection: Polyswitch
- Frequency Response: 20Hz to 17kHz
- Electrical Connection: Underwater, 16-2 Wire
- Dimensions: 8” (20.3cm) Dia. x 4.5” (11.5cm) Deep
- Recommended Amplification: 125 – 150 W at 4 Ohms
| AQ339 Diluvio Underwater Loudspeaker | |
 | High Resolution |
The Ugly Yellow Dot – How Far We Have Come
When I first came to Clark Synthesis, the Underwater Speaker was a relatively new product called the Aquasonic Underwater Loudspeaker, and it was really ugly. The speaker was yellow. The cord was yellow. The speaker came with an [...]
Important Considerations for Delivering Great Underwater Audio
Today, Clark Synthesis delivers underwater audio that sounds amazingly good to the human ear. Producing great music underwater is similar to producing great music in the air. But there are some important differences. Pay attention to the differences and you will be successful delivering your own underwater music experience. All high [...]
Speakers in Saltwater Pools – A Disturbing Discoloration
Today, more people are installing Clark Synthesis Underwater Speakers in saltwater pools. While customers are very pleased with the underwater music, a few witness a disturbing side effect. It looks like the speaker is rusting and the rust is running down the [...]
What Does An Underwater Speaker Sounds Like – Universal Orlando Surfside Inn – iPhone 11
How good does an Underwater Speaker sound? We created a video so you can hear what the Clark Synthesis AQ339 sounds like. Now you can judge for yourself. Most people expect underwater audio to sound awful, and [...]
Are You Crazy??? Six Year Diluvio™ Underwater Loudspeaker Warranty
This is a very vulnerable story, a story that most companies would rather keep hidden. This story reveals the history of a product’s weaknesses, how we overcame those weaknesses, and something about a grandmother’s [...]
The “Secret” of Diluvio™ Underwater Loudspeakers
It’s fun to see the amazement on people’s faces. The first time people hear the Diluvio™ Underwater Loudspeaker, they marvel at the beautifully clear underwater music. Why are our customers [...]
- All
- Swimming Pool Chemicals
- Swimming Pool Mounting
- Swimming Pool Wiring
- Swimming Pool- How Many & Where
- Tactile Sound
Yes. Send us a PDF of your pool. We will review the pool design, ask some questions, then make recommendations. This service is provided at no cost.
Are you dropping them in? It takes six Diluvio™ speakers to cover an Olympic swimming pool. Do you want to permanently mount the speakers? If so, please contact us for recommendations.
Yes. We are delighted to build a custom speaker for your swimming pool. Contact us for pricing and lead time.
The Diluvio™ comes with 100 feet (30.5 meters) of underwater cable attached.
Need a longer cable? We can make speakers with longer cables upon request.
Yes! Attach a rope one of the holes in the rubber ring. Use the rope to lower the speaker into the swimming pool, and to raise the speaker from the swimming pool.
Click here to see the installation guide for the AQ339.
Yes! Clark Synthesis TSTs are used in therapy chairs, therapy beds, massage tables, etc. If you do a Google search for Vibroacoustic, you will find many products that contain Clark Synthesis TSTs.
Clark Synthesis Tactile Sound Transducers (TSTs) transform pure audio as electrical energy into pure audio as vibrational energy. TSTs are much more than shakers. Shakers only make things shake. TSTs faithfully reproduce audio signals bringing new levels of realism and enjoyment to VR spaces, Home Theaters, Simulators, Movie Theaters, etc.
Yes. To prevent minerals from building up on the speaker, make sure that the sacrificial anode is working.
It depends on the size of your pool. We recommend one speaker for every 20 foot x20 foot area (6 meters x 6 meters area). Click here to learn more about speaker placement.
Click here to watch the video.
No. You can splice the new speaker into the old cable. You can get an underwater splice kit from your local electrical supply store.
Tactile Sound is pure audio that is felt through touch and is heard through bone conduction.
The Diluvio™ Underwater Loudspeaker is the world’s only full-frequency, full-fidelity underwater loudspeaker. Backyard pool enthusiasts, lap swimmers and competitive swimmers agree the Diluvio™ turns any pool experience into something truly spectacular. The Diluvio™ brings water to life, allowing music and sound to be heard through the body below the water’s surface.
The Diluvio™ can be used in two different ways. For a permanent installation, the Diluvio™ can be mounted inside a large light niche with a face ring kit (sold separately). For users who require underwater sound in multiple locations, such as synchronized swim teams, a tether can be attached to the Diluvio™ so it can be used as a drop-in speaker.
The Diluvio™ Underwater Loudspeaker requires an amplifier for operation. Clark Synthesis recommends an amplifier stable at 4 ohms that can deliver 125-150 watts @ 4 ohms (per speaker).
Specs:
- Continuous Power Handling: 135 watts
- Impedance: 4 ohms
- Overload Protection: Polyswitch
- Frequency Response: 20Hz to 17kHz
- Electrical Connection: Underwater, 16-2 Wire
- Dimensions: 8” (20.3cm) Dia. x 4.5” (11.5cm) Deep
- Recommended Amplification: 125 – 150 W at 4 Ohms
The Ugly Yellow Dot – How Far We Have Come
When I first came to Clark Synthesis, the Underwater Speaker was a relatively new product called the Aquasonic Underwater Loudspeaker, and it was really ugly. The speaker was yellow. The cord was yellow. The speaker came with an [...]
Important Considerations for Delivering Great Underwater Audio
Today, Clark Synthesis delivers underwater audio that sounds amazingly good to the human ear. Producing great music underwater is similar to producing great music in the air. But there are some important differences. Pay attention to the differences and you will be successful delivering your own underwater music experience. All high [...]
Speakers in Saltwater Pools – A Disturbing Discoloration
Today, more people are installing Clark Synthesis Underwater Speakers in saltwater pools. While customers are very pleased with the underwater music, a few witness a disturbing side effect. It looks like the speaker is rusting and the rust is running down the [...]
What Does An Underwater Speaker Sounds Like – Universal Orlando Surfside Inn – iPhone 11
How good does an Underwater Speaker sound? We created a video so you can hear what the Clark Synthesis AQ339 sounds like. Now you can judge for yourself. Most people expect underwater audio to sound awful, and [...]
Are You Crazy??? Six Year Diluvio™ Underwater Loudspeaker Warranty
This is a very vulnerable story, a story that most companies would rather keep hidden. This story reveals the history of a product’s weaknesses, how we overcame those weaknesses, and something about a grandmother’s [...]
The “Secret” of Diluvio™ Underwater Loudspeakers
It’s fun to see the amazement on people’s faces. The first time people hear the Diluvio™ Underwater Loudspeaker, they marvel at the beautifully clear underwater music. Why are our customers [...]
- All
- Swimming Pool Chemicals
- Swimming Pool Mounting
- Swimming Pool Wiring
- Swimming Pool- How Many & Where
- Tactile Sound
Yes. Send us a PDF of your pool. We will review the pool design, ask some questions, then make recommendations. This service is provided at no cost.
Are you dropping them in? It takes six Diluvio™ speakers to cover an Olympic swimming pool. Do you want to permanently mount the speakers? If so, please contact us for recommendations.
Yes. We are delighted to build a custom speaker for your swimming pool. Contact us for pricing and lead time.
The Diluvio™ comes with 100 feet (30.5 meters) of underwater cable attached.
Need a longer cable? We can make speakers with longer cables upon request.
Yes! Attach a rope one of the holes in the rubber ring. Use the rope to lower the speaker into the swimming pool, and to raise the speaker from the swimming pool.
Click here to see the installation guide for the AQ339.
Yes! Clark Synthesis TSTs are used in therapy chairs, therapy beds, massage tables, etc. If you do a Google search for Vibroacoustic, you will find many products that contain Clark Synthesis TSTs.
Clark Synthesis Tactile Sound Transducers (TSTs) transform pure audio as electrical energy into pure audio as vibrational energy. TSTs are much more than shakers. Shakers only make things shake. TSTs faithfully reproduce audio signals bringing new levels of realism and enjoyment to VR spaces, Home Theaters, Simulators, Movie Theaters, etc.
Yes. To prevent minerals from building up on the speaker, make sure that the sacrificial anode is working.
It depends on the size of your pool. We recommend one speaker for every 20 foot x20 foot area (6 meters x 6 meters area). Click here to learn more about speaker placement.
Click here to watch the video.
No. You can splice the new speaker into the old cable. You can get an underwater splice kit from your local electrical supply store.
Tactile Sound is pure audio that is felt through touch and is heard through bone conduction.