Wiring One or More TST239 Silver Transducers

Clark Synthesis Presents – Wiring One or More TST239 Silver Transducers

Wiring One TST239 –> 0:15
Wiring Two TST239s –> 0:40
Wiring Four TST239s –> 1:34

Wiring One TST239
Clark Synthesis recommends an amplifier rated 100-125 Watts per channel at 4 ohms (Pay attention to the 4 ohms!)
Attach the striped wire to the amplifier’s positive (+) output
Attach the clear wire to the amplifier’s negative (–) output

Wiring Two TST239s
Clark Synthesis recommends an amplifier rated 100-125 Watts per channel at 4 ohms (Pay attention to the 4 ohms!)
Connect TST #1’s clear wire to TST #2’s striped wire with a wire nut )you can also solder & use heat shrink tubing)
Attach TST #1’s striped wire to the amplifier’s positive (+) output
Attach TST #2’s clear wire to the amplifier’s negative (–) output

Wiring Four TST239s
Clark Synthesis recommends an amplifier rated 400-500 Watts per channel at 4 ohms (pay attention to the 4 ohms!)
Connect TST #1’s clear wire to TST #2’s striped wire
Connect TST #3’s clear wire to TST #4’s striped wire
Connect a cable from the Transducers to the amplifier
Connect a striped wire to TST #1 & TST #3’s striped wires
Connect a clear wire to TST #2 & TST #4’s clear wires
Attach the striped wire to the amplifier’s positive (+) output
Attach the clear wire to the amplifier’s negative (–) output
Older products may have different color wires.
Please contact Clark Synthesis for more information.

View the TST239 Wiring Diagram

For more information contact Clark Synthesis
303-797-7500
info@clarksynthesis.com
www.clarksynthesis.com