Share This:

Wiring 1 AQ339 Diluvioᵀᴹ Underwater Loudspeaker and Isolation Transformer to the Amplifier

  1. Place the Isolation Transformer in a Dry Location

  2. Connect the Speaker to the Isolation Transformer Output

  3. Connect a Cable to the Isolation Transformer

  4. Attach the Cable Black Wire to – Connector

  5. Attach the Cable White Wire to + Connector

 

Clark Synthesis recommends an amplifier rated 125-150 Watts per channel at 4 Ohms (Pay Attention to the 4 Ohms!)